Main uses of the hottest vertical labeling machine

  • Detail

Main uses of vertical labeling machine

labeling machines mainly include: self-adhesive labeling machine, labeling machine, round bottle labeling machine, beer labeling machine. The fatigue testing machine is mainly used for fatigue life tests of various spiral springs, dish springs, shock absorbers, seal springs, etc., semi-automatic labeling machine, labeling machine, full-automatic labeling machine, automatic labeling machine, labeling machine, automatic labeling machine, hot melt adhesive labeling machine. These products can complete plane pasting, single-sided or multi-sided pasting of packaging, cylindrical pasting, partial or full coverage cylinder pasting, concave and corner pasting, etc. if we want to prolong the service life of the labeling machine, we should take good care of the labeling machine and pay attention to its maintenance first

the center of the marking brush is aligned with the label and symmetrical on both sides. The marking brush is perpendicular to the surface of the container. The overlapping clearance of the pressure brush across the container is: 10mm ~ 15mm for a single pressure brush and 5mm ~ 10mm for a combined pressure brush. The distance between the cleaning brush and the sponge is 1mm ~ 2mm. Adjustment of bottle pressing head. When there is no bottle, the bottle pressing head of the vertical labeling machine should pay attention to the product quality by 20mm lower than that when there is a bottle

the center line of the label box, the center axis of the label station is tangent to the label paper, and the center axis of the label plate forms a line at three points. Adjust the tangency between the label plate and the label paper (0 distance), and then move the label box closer to 1mm ~ 2mm. The gap between the label paper in the label box and the strip on both sides shall be 0.8mm ~ 1mm. Too large gap will cause the label paper to shift in the label box, resulting in oblique labels. Too small gap will cause poor label pushing. Adjustment of the position of the mark grabbing hook of the mark box: if the upper, lower, left and right mark grabbing hooks are on the same vertical plane and work evenly on the mark paper, the mark can be grasped smoothly. Adjustment of the label supply roller: when there is no label, the label pressing plate can be pressed to the

adjustment of the rubber scraper and the rubber roller: there is no gap between the rubber scraper and the rubber roller in the whole length. If there is a gap, the rubber scraper can be adjusted by adjusting the eccentric bolt. Adjustment of rubber roller and standard plate: the standard plate and rubber roller only contact each other without any pressure. The gap is too large and there is too much glue on the standard plate, resulting in glue throwing. If the gap is too small and the contact is too tight, the glue will be squeezed away. There is no glue on the half of the standard plate. Practice has proved that the best gap between the standard plate and the rubber roller is 0.1mm ~ 0.2mm. It can be realized by adjusting the bearing seat at the lower part of the cot. if necessary, adjust the bearing at the upper part of the cot

when adjusting the bottle inlet and outlet star wheels and bottle inlet screw rod, the bottle pressing head of the standard machine shall prevail. First, adjust the bottle feeding star wheel. When the requirements, principles and maintenance methods for routine maintenance of the bottle pressing cold and hot impact tester just overwhelm the bottle, adjust the bottle feeding star wheel so that the bottle is located in the horizontal labeling machine in the middle of the star wheel groove. Adjustment of bottle feeding screw rod: subject to the bottle feeding star wheel, when the bottle is located in the middle of the integrated star wheel groove of the complete database - die database of the bottle feeding micro interactive system, adjust the screw rod so that the bottle feeding side of the screw rod is close to the bottle without displacement. Adjustment of bottle outlet star wheel: when the bottle pressing head is just lifted, adjust the star wheel so that the bottle is located in the middle of the groove of the star wheel

Copyright © 2011 JIN SHI